Rotary Key Switch -
(rks & rps) box and panel mounted

• 316 stainless steel keys
• Direct drive operation - positively opens contacts
• Replaceable code barrel assembly
• IP 65 rated enclosure - water and dust resistant
• Stainless steel dust cap included
• Up to 100A isolation
• 4 N/O or 2 N/O + 2 N/C contacts
• EEx isolator also available
• Conforms to EN 292, EN 1088, EN 60947-5-1, GS ET 19
• UL & CSA approval on switches.

• Key trapped until release signal is applied
• Direct drive operation—positively opens contacts
• Integral solenoid monitoring
• IP 65 enclosure or panel mounted versions
• Replaceable code barrel assembly
• Lid mounted ‘key free’ indication
• 316L stainless steel construction
• 24V DC, 110V AC/DC or 230V AC solenoid options
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088, EN 60947-5-1, GS ET 19
• UL and CSA approval on switches
• Single or multiple key units available

• Direct drive operation - positively opens contacts
• Integral monitored solenoid lock - failsafe & monitored
• Single key out or two keys out
• “Rundown” & “key free” L.E.D. or NEON indication
• IP 65 enclosure or panel mounted versions
• Replaceable code barrel assembly
• Integral 4 pole isolation switch
• 24Vdc, 110Vac or 230Vac solenoid options
• Failsafe timer or stop motion detection
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088, EN 60947-5-1 & GSET-19

• Direct drive operation
• Pneumatic isolation of moving machinery or processes
• Up to 10 BAR (120 psi)
• Replaceable code barrel assembly
• Multiple key units available
• Virtually maintenance free
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292 and EN 1088

• Range of valve sizes available
• Constructed from 316L stainless steel - excluding valve
• Direct drive push/pull operation
• Replaceable code barrel assembly
• Fitted with tamper resistant screws
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088

• 65° clockwise or counter clockwise rotation, 45°, 90° and 180° options available
• 3/8in square or 9/16inØ shaft versions
• Interchangeable with other switchgear levers and locks
• Virtually maintenance free
• Optional stainless steel dust cap available

• A range of off-the-shelf units in various combinations
• Replaceable code barrel assembly
• 316 Stainless steel construction
• Primary key(s) in release secondary keys simultaneously on units up to 6 way
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088 and GS ET 19

• 316 Stainless steel construction
• Single or dual key units
• Various extensions of bolt
• Direct drive push/pull operation
• Replaceable code barrel assembly
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088, GS ET 19 154

• 316 Stainless steel construction
• Single and dual key units
• Lever arm or fixed chain versions
• Direct drive push/pull operation
• Replaceable code barrel assembly
• Stainless steel dust cap as standard
• Conforms to EN 292, EN 1088, GS ET 19

• 316L stainless steel construction
• Selection of actuator types available
• Single or dual key versions available
• Direct drive push/pull operation
• Replaceable code barrel assembly
• Fitted with tamper resistant screws
• Weatherproof stainless steel dust cap as standard
• Conforms to EN 292, EN 1088, GS ET 19